PR1-E-1.5kW | 6.3A Single-Phase Burst Fire Controller | 230V

Description PR1-E-1.5kW Single Phase Burst Fire Power Controller The PR1-E-1.5kW is a compact single-phase burst fire power controller designed for accurate and reliable control of resistive heating loads. Utilising advanced fast pulse zero-voltage switching technology, it delivers smooth power regulation while minimising flicker and eliminating radio frequency interference (RFI). Designed for HVAC and industrial heating applications, the PR1-E-1.5kW provides flexible control through either a DC signal or manual potentiometer input. Integrated semiconductor fuse protection, automatic over-temperature monitoring, and an enclosed heatsink ensure dependable performance and long service life. With its compact size, straightforward installation, and robust construction, the PR1-E-1.5kW is an ideal solution for low-power heating applications requiring efficient and precise energy control. Key Features Precise single-phase burst fire control for resistive loads Fast pulse zero-voltage switching technology Minimises flicker and eliminates RFI DC signal or manual potentiometer control Automatic reset over-temperature protection Integral semiconductor fuse protection Built-in heatsink for efficient thermal management Status LED indication tracking output level Sensor loss detection Compact enclosed design Easy-access power and control terminals Suitable for HVAC and industrial heating applications Technical Specifications Electrical Power rating: 1.5kW (6.3A) Supply voltage: 240V RMS nominal Input voltage: 230V RMS ±10% Frequency: 50/60Hz Control Input Options Voltage signal input: 0–10V DC (factory setting) 0–5V DC (selectable via SW1) Manual control: 5kΩ potentiometer (not supplied) Status Indication Output status LED: LED intensity varies with control signal level Protection Features Over-temperature protection Trip temperature: 90°C ±1°C Automatic reset temperature: 85°C ±1°C LED indication: Flashes at 0.5-second ON/OFF intervals Sensor loss detection LED indication: Flashes at 1-second ON/OFF intervals Terminal Connections Power and Earth: 2.5mm² maximum cable entry Control signal: 2.5mm² maximum cable entry Torque Settings Power and earth terminals: 0.5Nm Fusing Fuse type: F10A ceramic quick-blow ferrule fuse Fuse size: 6mm Ø × 32mm Environmental Maximum ambient operating temperature: 65°C Mechanical Dimensions: 140mm (L) × 99mm (W) × 45mm (H) Fixing centres:  75mm (W) × 120mm (L) 4 × 4.5mm mounting holes Top two fixing holes are keyhole slots Weight: 0.5kg Safety Information Always isolate the power supply before removing the cover. The heatsink and metal components may become extremely hot during operation. Do not obstruct enclosure ventilation openings. A load break switch and contact breaker should be installed in the load supply. The contactor coil supply should be interrupted by an over-temperature thermostat and airflow monitoring device where appropriate. Applications Suitable for single-phase resistive heating loads including: HVAC heating systems Battery heaters Hot water tanks Heating cables Process heating equipment Industrial heaters Commercial heating systems Trace heating applications Environmental heating control systems Optimise your single-phase resistive load control with the reliable and efficient PR1 thyristor stacks. Whether for HVAC applications or various industrial processes, the PR1 series provides robust performance and easy installation, ensuring seamless and safe operation.